| DIP
Sockets
Dip sockets with machined contacts should be used
to connect the MetaLink Emulator to the target system.
PLCC Sockets
PLCC sockets manufactured by Robinson Nugent have
been found to provide the best connection to the target system for the
MetaLink Emulator.
Surface mount QFP
The MetaLink Emulator supports surface mount
devices using "feet" made by Ironwood Electronics. The
Ironwood "foot" has the same footprint of the surface mount
microcontroller and is soldered directly to the target system in place
of the microcontroller. The emulator can then be plugged into the
"foot". A target system that is equipped with an Ironwood foot
can still be tested with the real microcontroller using a Chip Carrier
Adapter, also made by Ironwood.
Example part numbers:
Ironwood Foot for 44
QFP: SF-QFE44SA-L-01
Ironwood Chip Carrier Adapter: CA-QFE44SA-L-Z-T-01
Further information on other Ironwood products can
be found at http://www.ironwoodelectronics.com/.
|
